Search
Now showing items 31-37 of 37
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...
Carbonation of limestone powder concrete: state-of-the-art overview
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2023)
Recently, research into finding long-term solutions to CO2 mitigation in the cement and
concrete sectors was initiated since commonly used supplementary cementitious materials
are not globally available in sufficient ...
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...