Pretraživanje
Prikaz rezultata 21-30 od 168
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Design and construction of a very lively bridge
(Topics in Dynamics of Civil Structures - Proceedings of the 31st IMAC, A Conference on Structural Dy, 2013)
In recent years, an increasing number of light structures has been reported to exhibit substantial vertical vibrations when exposed to pedestrian-induced dynamic loading. It is believed that pedestrians interact with lively ...
Model for practical carbonation depth prediction for high volume fly ash concrete and recycled aggregate concrete
(Elsevier, 2019)
The reuse of industrial residue streams such as fly ash (FA) or waste materials such as recycled concrete aggregate (RCA) can be beneficial both from an economic and an ecological point of view. Extensive research, ...
Creep of recycled aggregate concrete: Experimental database and creep prediction model according to the fib Model Code 2010
(Elsevier Ltd, 2019)
Recycled aggregate concrete (RAC) is a promising solution to addressing the sustainability issues raised by concrete production. However, its long-term properties are not fully characterised, especially creep behaviour, ...
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kauno Technologijos Universitetas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Converging stepped spillway flow
(Taylor and Francis Ltd., 2016)
Wall deflection in supercritical flow induces standing waves which significantly influence the flow field close to the wall. This paper analyses the flow in the converging stepped spillway, using two scale-models with ...
Effects of recycled concrete aggregate on stiffness and rutting resistance of asphalt concrete
(Elsevier Ltd, 2017)
The objective of this research was to assess the possibility of using recycled concrete aggregate (RCA) in asphalt mixtures. The experimental research included 10 asphalt mixtures with partial natural aggregate substitution ...
Ductility of different types of shear connectors – experimental and numerical analysis
(Czech Technical University in Prague, 2019)
Different types of shear connectors, which are used for achievement of steel-concrete
composite action, have been developed during decades. Their suitability for various range
of structures and loadings is determined by ...
08.49: Comparison of headed studs with perfobond shear connectors - experimental and numerical analysis
(ce/papers, 2017)
Different types of shear connectors which assure composite action between steel profile and concrete slabs have been developed during decades, considering different shapes, installation equipment and ...