Претраживање
Приказ резултата 31-40 од 68
The rainfall-induced landsliding in Western Serbia: A temporal prediction approach using Decision Tree technique
(Elsevier B.V., 2018)
This paper focuses on modeling rainfall-induced massive landsliding in the Western Serbia in the 2001-2014 period. The motivation for conducting the study was the rainfall-induced flooding and landsliding that took place ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Shear deformable dynamic stiffness elements for a free vibration analysis of composite plate assemblies - Part I: Theory
(Elsevier Ltd, 2017)
A procedure for developing the dynamic stiffness matrix of a completely free laminated composite plate based on the first-order (FSDT) and higher-order shear deformation theory (HSDT) is presented. The proposed method ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Improving merge methods for grid-based digital elevation models
(Elsevier Ltd, 2016)
Digital Elevation Models (DEMs) are used to represent the terrain in applications such as, for example, overland flow modelling or viewshed analysis. DEMs generated from digitising contour lines or obtained by LiDAR or ...
Can we use a simple modelling tool to validate stormwater biofilters for herbicides treatment?
(Taylor and Francis Ltd., 2018)
This study proposes a new stormwater biofilter validation approach, using a process-based model of micropollutant removal in stormwater biofilters. The model performance was assessed against in-situ challenge tests conducted ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Modeling Urban Land Use Changes Using Support Vector Machines
(Blackwell Publishing Ltd, 2016)
Support Vector Machines (SVM) is a machine learning (ML) algorithm commonly applied to the classification of remotely sensing data and more recently for modeling land use changes. However, in most geospatial applications ...
Improved Loop-Flow Method for Hydraulic Analysis of Water Distribution Systems
(American Society of Civil Engineers (ASCE), 2018)
Different methods have been developed in the past to formulate and solve steady-state hydraulics of a water distribution system (WDS). The most widely used method nowadays is probably the global gradient algorithm (GGA). ...
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...