Pretraživanje
Prikaz rezultata 1-10 od 90
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...
Thermo-elastic stability of angle-ply laminates - application of layerwise finite elements
(Institut za ispitivanje materijala, Beograd, 2016)
In this paper thermal buckling analysis of angle-ply laminates is analysed using Generalized Layerwise Plate Theory (GLPT) of Reddy, /1/. The finite element solution is derived from the weak form of the problem. The nine-node ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
Methodology for sequent depth estimation for converging stepped-chute stilling basins / Metodologija proračuna spregnutih dubina kod umirujućih bazena neprizmatičnih stepenastih brzotoka
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2016)
The influence of converging stepped spillways on the dimensions of the stilling basins for RCC dams was examined, based on the results of physical modeling, existing empirical expressions, and basic laws of fluid mechanics ...
Forming a correlation among the properties of fresh self-compacting concrete using fuzzy least squares model
(Faculty of Civil Engineering Osijek, 2016)
The research presented in this paper was motivated by two problems regarding the properties of fresh self-compacting concrete (SCC). The first problem is that mixture properties can vary owing to different factors (composition, ...
Application of fuzzy ahp method based on eigenvalues for decision making in construction industry
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2016)
The Analytic Hierarchy Process (AHP) has found wide application for multicriteria decision making (MCDM) in various areas. In the paper is given a short survey of the AHP application for decision making in the construction ...
Sizing and calibration of urban stormwater infiltration system in Belgrade / Dimenzionisanje i kalibracija sistema za infiltraciju kišnice na urbanom slivu u Beogradu
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2016)
This work shows a way to size and calibrate parameters of urban stormwater collection and treatment infiltration system. Its design allows collection of stormwater runoff events for a 2 year return period and infiltration ...
An improved analysis of free torsional vibration of axially loaded thin-walled beams with point-symmetric open cross-section
(Elsevier Inc., 2016)
The objective of the paper is to analyze the influence of bimoment induced by constant axial loads on the free motion of thin-walled beams with point-symmetric open cross-section. For various boundary conditions, a closed-form ...
Development and application of numerical method in open channel flow in boundary fitted coordinate system with density function method
(Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering), 2016)
Categories of reliability that should be analized during the planning and operation of water resources systems / Kategorije pouzdanosti koje se moraju proveravati tokom planiranja i korišćenja vodoprivrednih sistema
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2016)
From the standpoint of reliability - a key indicator of the probabilistic effectiveness of systems - water resources systems (WRS) belong to the class of the most sensitive system with multiple categories of reliability. ...