Претраживање
Приказ резултата 1-10 од 109
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...
Resistance of cold-formed built-up stainless steel columns - Part II: Numerical simulation
(Elsevier Ltd, 2018)
In parallel with an experimental investigation of the flexural buckling behaviour of built-up stainless steel columns presented in the accompanying paper (Dobric et al., submitted for publication), a detailed Finite Element ...
Resistance of cold-formed built-up stainless steel columns - Part I: Experiment
(Elsevier Ltd, 2018)
Nowadays, the codified procedure for design of centrically compressed cold-formed stainless steel (CFSS) builtup members is absent in Europe. Besides, there are no published research information and experimental data in ...
Management of bridges with shallow foundations exposed to local scour
(CRC Press/Balkema, 2016)
The Serbian road network includes the large portion of bridges with shallow foundations that are vulnerable to local scour as tragically demonstrated during the extreme flooding in May 2014. In order to enhance preparedness ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
Thermoinelasticity of Damaged Elastomers by Self-consistent Method
(International Journal of Damage Mechanics, 2008)
This study deals with an elastomer body having a random 3D distribution of two types of inclusions: spheroidal mutually parallel voids and differently oriented reinforcing parallel elastomeric stiff spheroidal short fibers. ...
An improved analysis of free torsional vibration of axially loaded thin-walled beams with point-symmetric open cross-section
(Elsevier Inc., 2016)
The objective of the paper is to analyze the influence of bimoment induced by constant axial loads on the free motion of thin-walled beams with point-symmetric open cross-section. For various boundary conditions, a closed-form ...
Bounding surface model for overconsolidated clays with new state parameter formulation of hardening rule
(Elsevier Ltd, 2017)
The paper presents a critical state bounding surface constitutive model for describing the behaviour of overconsolidated clays for a wide range of overconsolidation ratios, called the Hardening State Parameter - HASP model. ...
Boundary element-dual reciprocity formulation for bound electron states in semiconductor quantum wires
(Computer Physics Communications, 2008)
Using the boundary element dual reciprocity method-multi-domain (DRM-MD) a bound electron states and corresponding wave functions in semiconductor quantum wires embedded in a matrix were considered. The single circular and ...