Претраживање
Приказ резултата 31-40 од 109
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Bed-mounted Electro Magnetic meters: Implications for robust velocity measurement in Urban Drainage systems
(Elsevier B.V., 2018)
Flow monitoring in Urban Drainage Systems (UDS) is required for a successful system control and operational assessment. Commonly used methods can lead to erroneous results in partially filled pipes and hostile environmental ...
Parametric modeling as geometric tool for designing urban model of biomorphic from inspired by flower of bell flower (Campanula persicifolia L.)
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Technical Sciences, University of Novi Sad, 2018)
The aim of this research was to apply parametric modeling as appropriate geometric tool in landscape architecture design. Nature model used as inspiration in designing process was flower of the species bell flower (Campanula ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Biodesign inspired by the leaf and flower of dandelion (leontodon taraxacum l.)
(Published by the AFGS2021 Organizing Committee, 2021)
Bionics is a scientific field that studies the laws of origin and structure of "living"
nature in combination with knowledge of biology and technology. By applying bionics, sustainable solutions and answers to the great ...
Triangular proportional scheme and concept of the two Serbian medieval churches
(Springer Verlag, 2018)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Quantitative assessment of the parameters linked to the blending between reclaimed asphalt binder and recycling agent: A literature review
(Elsevier, 2020)
The lack of understanding the mechanisms governing the interaction between reclaimed asphalt binder (RAb)1 and recycling agents is one of the technical issues that still need to be resolved when high amount of reclaimed ...