Претраживање
Приказ резултата 1-10 од 809
Application of a software package Topocad in geodetic works / Primena softverskog paketa Topocad u geodetskim radovima
(Savez inženjera i tehničara Srbije, Beograd, 2011)
Software package Topocad is used for processing and analysis of geodetic measurements. The program is developed by Swedish company Adtollo. It contains all the options that are most frequent in the surveying jobs. This ...
In-plane free vibration and response analysis of isotropic rectangular plates using the dynamic stiffness method
(Elsevier Ltd, 2015)
The development of the dynamic stiffness matrix for isotropic rectangular plate with arbitrary boundary conditions undergoing in-plane free vibration is presented in this paper. Gorman's superposition method is exploited ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
Flood control of tailings-dam reservoirs / Problemi evakuacije velikih voda iz jalovišnih akumulacija
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2017)
This paper analyzes the problems of flood control for the tailings-dams reservoirs, having in mind the significant rise of the flow and volume of observed flood waves, and increasingly stringent criteria for safety of high ...
Intensity Fiber-Optic Sensor for Structural Health Monitoring Calibrated by Impact Tester
(Institute of Electrical and Electronics Engineers Inc., 2016)
In this paper, the use of intrinsic intensity fiber-optic sensors for structural health monitoring was investigated. Polyethylene-based composite samples with glass mat reinforcement and embedded telecommunication fibers ...
Thermo-elastic stability of angle-ply laminates - application of layerwise finite elements
(Institut za ispitivanje materijala, Beograd, 2016)
In this paper thermal buckling analysis of angle-ply laminates is analysed using Generalized Layerwise Plate Theory (GLPT) of Reddy, /1/. The finite element solution is derived from the weak form of the problem. The nine-node ...
The main project of horizontal deplacement monitoring by geodetic methods at the area of 'Nova Kolubara' / Glavni projekat geodetskog osmatranja horizontalnog pomeranja priobalja reke 'Nova Kolubara'
(Savez inženjera i tehničara Srbije, Beograd, 2010)
The new position of the Kolubara river has been finished since 19.09.2007. Starting from that time, new works are oriented through finishing activities regarding to the new river flow. This article presents the geodetic ...
Building a Construction Project Key-Phrase Network from Unstructured Text Documents
(American Society of Civil Engineers (ASCE), 2017)
During a construction project lifecycle, an extensive corpus of unstructured or semistructured text documents is generated. The nature of unstructured sources impedes users' acquisition, analysis, and reuse of relevant ...
Auslegung von Stahlbetonrahmentragwerken mit Ausfachungen aus Ziegelmauerwerk (Teil 1) / Design of reinforced concrete enclosures infilled with clay block masonry (Part 1)
(Bauverlag BV GmbH, 2018)
Within the scope of the joint European project INSYSME, the German partners developed two systems - IMES and INODIS - for improving the seismic behaviour of masonry infilled reinforced concrete frames. The purpose of both ...
Frequency- and time-domain methods related to flutter instability problem / Metode analize flatera u frekventnom i vremenskom domenu
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2014)
Bridge flutter phenomenon presents an important criterion of instability, which should be considered in the bridge design phase. This paper presents different bridge flutter methods which can be used to solve the flutter ...