Претраживање
Приказ резултата 281-290 од 290
Geometric approach to the revitalization process of the medieval Serbian monasteries
(Vilnius Gediminas Technical University, 2015)
Among the standard approaches concerning cultural heritage preservation, the architectural point of view deserves particular attention. The special place in medieval Serbian history of architecture belongs to the world ...
Physical and mechanical properties of Ultra-high- performance concrete with limestone
(Macedonian Association of Structural Engineers, 2022)
The production of ultra-high performance concrete is one of the new ideas in modern construction, developed in the past few decades. A compressive strength higher than 150 MPa has been achieved using a relatively large ...
Climate change in Serbia and adaptation measures in the field of water resources management
(Slovenian Committee on Large DamsMacedonian Committee on Large Dams, 2020)
The paper presents the actual situation in the field of water, especially water as a resource. With an average amount of domestic water of about 1700 m3 per capita per year, Serbia is one of the poorest countries in Europe. ...
Management of the stresses in CWR on the bridge
(Zbornik radova 1. Međunarodne konferencije - Železnički transport u savremenom svetu 2019, 2019)
Railway bridges have to ensure the same traffic safety and ride comfort along the entire
length of the railway line including track sections on the bridges. Authors investigated the
possibilities to avoid rail expansion ...
Theoretical analysis of the possibilities for aluminium alloy beam to be strengthened using elements of steel
(Trans Tech Publications Ltd, 2016)
This paper deal, on example of aluminium alloy beam strengthened by using elements of steel, with theoretical analysis of the possibilities for composite action of beam formed from two materials with considerably different ...
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...
A digital solution for unlocking the urban mining potential of the residential building stock through the integration of BIM and GIS
(Conference on interdisciplinary and transdisciplinary research for sustainable development, 2022)
The construction industry consumes up to half of the excavated primary resources and
generates one-third of total waste annually, impacting the environment and society. To
reduce this impact, maintaining the primary ...
Geometry as a common ground for BMS and BIM
(IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures, 2022)
Bridge Management Systems (BMSs) are sophisticated software tools, widely used for managing bridges. Comprising a centralized database of all relevant information for the entire bridge stock and analytics to forecast ...
Influence of climate conditions on stresses in CWR on the bridges in Serbia
(VII International Scientific Conference of the Faculty of Transport Engineering, 2018)
Vehicle/track/bridge interaction causes additional stresses in CWR on the bridge, which
include stress in rails due to temperature changes in the bridge deck, vertical bending of
bridge deck, and braking/acceleration of ...
Layerwise finite element for free vibration of geometricaly imperfect composite plates
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2022)
After establishing the accuracy of the present layerwise model for linear and geometrically nonlinear bending, vibration and buckling analysis of laminated composite and sandwich plates subjected to mechanical load, as ...