Претраживање
Приказ резултата 31-40 од 40
Design aspects of Eurocode 2 methods for deflection control
(Czech Concrete Society, 2011)
Paper deals with problems arising from application of the EN 1992-1-1:2004 deflection control clauses. Remarks are addressed both to the instructions for a rigorous method and to the simplified procedure for an indirect ...
Green Concrete and Mortar Made with Recycled Aggregate – a Step towards Sustainability in Civil Engineering
(IRASA – International Research Academy of Science and Art Belgrade, 2022)
The testing of physical and mechanical properties has always been the starting point for production of adequate cement composites, such as concrete and mortar. The need to preserve the environment by recycling materials, ...
Influence of cement replacement with limestone filler on the properties of concrete
(Građevinski materijali i konstrukcije, 2021)
This paper presents an experimental research of one type of green concrete in which Portland cement was replaced with two types of limestone filler of the same origin and mineralogical composition, but with a different ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Modeling of properties of fiber reinforced cement composites / Modeliranje svojstava mikroarmiranih cementnih kompozita
(Univerzitet u Nišu, Niš, 2008)
This paper presents the results of authors' laboratory testing of the influence of steel fibers as fiber reinforcement on the change of properties of cement composite mortar and concrete type materials. Mixtures adopted - ...
Гранична носивост армиранобетонских гредних носача од бетона са великим садржајем летећег пепела
(Универзитет у Београду, Грађевински факултет, 2018)
Бетон је један од најчешће коришћених материјала данашњице. Међутим,током производње цемента, испушта се приближно једна тона CO2 за свакутону произведеног портланд цементног клинкера. До сада је уложено пунотруда у ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...