Претраживање
Приказ резултата 11-20 од 292
Strength of composite flysch samples under uniaxial compression
(Springer Verlag, 2018)
This paper presents the results of uniaxial compression strength tests performed on samples composed of sandstone and siltstone discs. Samples are loaded until failure, with the aim of determining the dependency between ...
On computational aspects of data processing of geodetic networks with large number of unknown parameters / O računskim aspektima obrade podataka geodetskih mreža s velikim brojem nepoznatih parametara
(Geodetski list, 2011)
Some special characteristics of linear systems of equations, which arise from geodetic network adjustment, optimization and pre-analysis, are outlined in this paper. Advantages and disadvantages of several methods for ...
Analysis based on the energy release rate criterion of a dynamically growing crack approaching an interface
(SAGE Publications Ltd, 2016)
A problem of a dynamically growing crack, which is approaching an interface between the two elastic isotropic materials at an arbitrary angle, is considered in this paper. That crack could behave in three ways: (i) it can ...
Supercritical flow in circular conduit bends
(Taylor and Francis Ltd., 2015)
A complex flow pattern occurring in a circular conduit bend with supercritical flow has been studied. The main objective was to obtain reliable criteria for prediction of the onset of helical and choking flow, in order to ...
Study of Fly Ash in Making Cementitious Composites
(Applied Mechanics and Materials, 2015)
Applications of fly ash in building industry have very important and relevant problems of origin which are discussed in this paper. Authors have performed tests on mortar, plain concrete and Self Compacting Concrete (SCC) ...
Robust estimation of the normal-distribution parameters by use of structural partitioning-Perobls D method
(American journal of computational mathematics, 2019)
Primena mehanički spojenih sredstava za sprezanje u spregnutim konstrukcijama
(Savez građevinskih inženjera Srbije, 2019)
Savremeni trendovi u građevinarstvu u oblasti spregnutih konstrukcija od čelika i betona najčešće se ogledaju u povećanim zahtevima za ubrzanom gradnjom, razvojem novih vrsta sredstava za sprezanje i prefabrikovanom gradnjom. ...
Behaviour of stainless steel press-braked channel sections under compression
(Elsevier Ltd, 2017)
This paper describes an experimental and numerical investigation of stainless steel material response and behaviour of press-braked channel sections under pure axial compression. A material test programme that covers ...
A simplified procedure of metrological testing of the terrestrial laser scanners
(Elsevier B.V., 2014)
This paper presents a simplified test procedure of the terrestrial laser scanners (TLS) accuracy investigation by the general criteria of the ISO17123 standard. The proposed procedure covers investigation, analysis and ...
Wind energy potential above a high-rise building influenced by neighboring buildings: An experimental investigation
(Elsevier, 2018)
It is believed that the local topology has a significant effect on the wind flow pattern, wind velocity and turbulence intensity of the flow above the roof of buildings and thus is significantly influencing wind harvesting ...