Претраживање
Приказ резултата 1-10 од 18
О утицају подводних каскада на неке хидродинамичке показатеље течења на речним ушћима / Effects of a bed step on some hydrodynamic properties of flow in river confluences
(Univerzitet u Beogradu – Građevinski fakultet, 2015)
На речним ушћима се услед исталожавања крупног наноса који пристиже коритом притоке
стварају подводне каскаде због којих је дно притоке издигнуто изнад дна реке. У раду се помоћу модела просторног течења испитује како ...
Просторно течење на речним ушћима (утицајни чиниоци) / Controls of three-dimensional flow at river confluences
(Задужбина андрејевић / Zadužbina Andrejević, 2013)
Монографија се бави изучавањем хидраулике ушћа великих алувијал них водотока и ушћа у велике алувијалне водотоке. Течење на овак вим ушћима је изразито мирно (Fr < 0,3), а нанос који пристиже са узвод них деоница ...
Hydrodynamics of 90o concordant beds’ confluences of straight-channels with unequal channel widths
(EGU (European Geophysical Union), 2017)
With the exception of confluences of large alluvial rivers, tributary channel is usually narrower that the channel of the main-river. hydrodynamics of confluences of equal width channels has been thoroughly studied using ...
Effects of bed material grain-size distribution on bed morphology at a river confluence - numerical study
(EGU (European Geophysical Union), 2017)
River confluences play an important role in the drainage of a catchment and transport of sediments and pollutants within this area. Riverbed morphology at these important nodes of the river drainage network might be very ...
Application of 3D numerical models in confluence hydrodynamics modelling
(University of Illinois at Urbana-Champaign, 2012)
In this paper performance of the SSIIM2 model (3D finite-volume model with the k-ε-type turbulence model closure) in confluence hydrodynamics modelling is assessed using the published experimental ...
Can a 3D-Numerical Model be a Substitute to a Physical Model in Estimating Parameters of 1D-Confluence Models?
(Universidade do Porto, Faculdade de Engenharia, 2014)
A possibility of using a 3D-numerical model instead of a more expensive physical one for estimation of parameters in 1D-confluence models is considered. A set of existing experimental data from 90º confluence is used for ...
Numerical Simulation of 3D Flow at Right-angled Confuence with and without Upstream Planform Curvature
(Chemical Industry Press, Beijing, 2010)
This paper aims at studying the effect of upstream planform curvature on the flow in the confluence hydrodynamics zone. To do this, a 3D numerical model is used for simulation of flow at right-angled
confluences with ...
Controls at river confluences with discordant beds / Uticajni činioci na rečnim ušćima sa izdignutim dnom pritoke
(Savez građevinskih inženjera Srbije, Beograd, 2012)
The role of four parameters that are controlling river confluence hydrodynamics at discordant beds confluences is investigated using 3D numerical model. These are: the junction angle α, the momentum-flux ratio between the ...
Numerical study of 3D flow at right-angled confluences with and without upstream planform curvature
(IWA Publishing, 2013)
The purpose of this paper is to study the individual and combined effect of upstream planform curvature and difference in bed elevations at the tributary entrance to the confluence on the flow in the confluence hydrodynamics ...
Numerical simulation of 3D flow at 90o straight-channel confluence with bed elevation discordance
(TuTech Verlag, TuTech Innovation GmbH, 2012)
The paper aims at studying the effect of difference in bed elevations between the tributary and main canals (∆zT) on the flow in the confluence hydrodynamics zone. To do this, a 3D numerical model is used for flow simulation ...