Pretraživanje
Prikaz rezultata 1-10 od 57
Height anomalies determined by three different GOCO models
(International Multidisciplinary Scientific GeoConference-SGEM, 2019)
This paperwork is dedicated to the research of the quality of height anomalies derived from the Global Geopotential Models GOCO over the Serbia territory. Three different types of approaches for the same model were considered: ...
The clean graph of a commutative ring
(Charles Babbage Research Centre, 2017)
To gain a better understanding of clean rings and their relatives, the clean graph of a commutative ring with identity is introduced and its various properties established. Further investigation of clean graphs leads to ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...
Numerical study of vibrations induced by horizontal-axis wind turbine on a steel building
(Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2019)
One of the most important acceptance issues regarding the implementation of small-scale wind turbines in urban environments is related to human comfort. Turbine-induced vibrations can have a large influence on small-scale ...
Глобални геопотенцијални модели
(2018)
Уџбеник садржи 9 поглавља при чему jе прво поглавље посвећено основама теориjе физичке геодезиjе и то онаj део коjи се односи на сфернохармониjски развоj реалног и нормалног потенциjала Земљине теже и теже Нормалне Земље, ...
Image Processing for Hydraulic Jump Free-Surface Detection
(IAHR, 2019)
Hydraulic jumps exhibit a high degree of free-surface oscillations, triggered by intense turbulence and aeration.
These processes are difficult to model numerically and are frequently investigated on a scale model. ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Menadžment u geodeziji
(2010)
Geometric Redesign of the Subdivided Surface of CC II: Application In Architecture
(Bucharest, Romania: SORGING–ROMANIAN SOCIETYFORENGINEERINGGRAPHICS, 2019)
The concave polyhedral surface of CC II can be used as a structural template for architectural design of domes, roofs or other covering or stand-alone structures. Subdivision of CC II faces in geometrically defined way can ...
Claim management according to PMI standard
(XX Internacionalni simpozijum iz projektnog menadžmenta ''Značaj projektnog menadžmenta prvih 30 godina YUPMA i 50 godina IPMA'', 2016)
S obzirom na to da je svaki građevinski projekat unikatan, često dolazi do neslaganja između ugovorenih i planiranih parametara realizacije posla. Takva situacija obično dovodi do nastanka odštetnog zahteva. Izuzetno je ...