Претраживање
Приказ резултата 81-90 од 316
Upravljanje vodama u uslovima klimatskih promena / Water Management in Climate Change Conditions
(Srpsko društvo za zaštitu voda, 2020)
U radu je prikazano realno stanje u oblasti voda, posebno vode kao vodnog resursa. Sa prosečnim količinama domicilnih voda od oko 1700 m3 po stanovniku godišnje Srbija spada među vodom siromašnije zemalje Evrope. Situacija ...
Basic principles of 3D concrete printing in the light of sustainable development
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2021)
Although conservative, the construction industry must be transformed in line with new technologies. Adopting the concept of 3D printing can provide a handful of benefits in terms of creativity, flexibility, less waste ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
Софтверско-хардверско решење за естимацију термалног импулсног одзива вишеслојног равног зида
(Univerzitet u Beogradu, Građevinski Fakultet, 2020)
Comfort and elegance in auto design
(Serbian Society for Geometry and Graphics, University of Belgrade - Faculty of Mechanical Engineering, 2020)
Today, we are witnessing a strong combination between industry and art. It can even be argued that authentic artistic industry is being created, which consists of the manufacturing of products that combine useful qualities ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Project oriented problem based learning: The first experiances of using this approach at the study program of Geodesy and geoinformatics
(Savez inzenjera i tehnicara Srbije, 2020)
Projektno orijentisan problemski zasnovan pristup učenju (eng. Project Oriented and Problem Based Learning/Problem Oriented Project Based Learning - POPBL) jeste koncept koji je prvi put uveden sedamdesetih godina prošlog ...