Претраживање
Приказ резултата 1-10 од 248
Estimation of 1D-confluence model parameters in right-angled discordant beds’ confluences using 3D numerical model
(CRC Press/Balkema, 2016)
Parameters of 1D confluence models are originally defined for concordant beds’ (CB’s) confluences. This paper aims at estimating these parameters for discordant beds’ confluences using numerical simulation results of 3D ...
Hydrodynamic effects of debris blockage and scour on masonry bridges: Towards experimental modelling
(CRC Press/Balkema, 2016)
This paper describes the preliminary stage of an ongoing project investigating the hydrodynamic effects of debris blockage at masonry bridges. Debris blockage is cited as one of the primary causes of bridge failures in the ...
On the combined effect of bed elevation discordances in the main-river and the tributary in 90° straight-channel confluences
(CRC Press/Balkema, 2016)
The role of the difference in bed elevations in the main-river (ΔzMR) and the tributary (ΔzT) at their entrance to a 90° straight-channel confluence is studied numerically using a 3D finite-volume model. Three characteristic ...
Experimental investigation of scour and pressures on a single span arch bridge under inundation
(Utah State University, 2018)
This paper presents two experiments, carried out in a 605mm-wide flume, to investigate scour and hydrodynamic pressure on a scaled model of a single span arch bridge. The geometry of the bridge model is scaled down according ...
Triangular proportional scheme and concept of the two serbian medieval churches
(Springer Verlag, 2019)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
Use of hydrated lime and cement bypass dust as alternative fillers in hot mix asphalt
(ZAS - Združenje asfalterjev Slovenije, 2019)
Road quality has an important role for the smooth traffic flow. Asphalt concrete layers are the most significant elements of roads; but due to their position, they are exposed to the influence of many external factors ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Possible Use of Ground Sulfur as Petroleum Industry Byproduct in Self Compacting Concrete Production
(Association for Promotion of Holistic Approach to Environment, Buzetska 25 44000 Sisak, Republic of Croatia, 2018)
The quantities of component materials used for production of concrete are high on the global scale, therefore alternative materials are experimented on, in order to replace the natural ones. The possibility of using ground ...
Prediction of aircraft noise using machine learning
(Silesian University Press, Gliwice, Poland, 2021)
In this paper an attempt has been made to predict and evaluate the aircraft-induced noise using model developed by means of machine learning. First step in the development of the model was to artificially calculate noise ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...