Претраживање
Приказ резултата 1-10 од 213
Estimation of vertical accuracy of digital terrain model FABDEM on the territory of the republic of Serbia
(SGEM, 51 Alexander Malinov blvd, Sofia, 1712, Bulgaria, 2022)
In 2004, a digital terrain model (DTM) was created in Serbia. It was obtained by vectorizing isohypses on topographic maps with a scale of 1: 25000. The resolution of the digital model of Serbia is 30 m, and the vertical ...
Furthering knowledge on the flow pattern around high-rise buildings: LES investigation of the wind energy potential
(Elsevier, 2022)
To understand the favourable locations for maximum yield of urban wind energy, understanding the flow pattern on the roof region of high-rise buildings is crucial. However, very few studies in the literature report on the ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
(Brick and Block Masonry-From Historical to Sustainable Masonry: Proceedings of the 17th International Brick/Block Masonry Conference (17th IB2MaC 2020), 2020)
Reinforced concrete (RC) structures with masonry infills are widely used for several types of buildings all over the world. However, it is well known that traditional masonry infills constructed with rigid contact to the ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Epilithic diatoms in environmental bioindication and trout farm’s effects on ecological quality assessment of rivers
(Elsevier, 2021)
The main aim of this study was to investigate the application of benthic diatoms and the efficiency of diatom indices in water ecological assessment of rivers in Serbia, as well as the influence of trout farms on rivers ...