Search
Now showing items 1-10 of 23
Fast data assimilation for open channel hydrodynamic models using control theory approach
(Elsevier, 2020)
Model-driven forecasting, used for flood risks or big hydropower systems management, can produce results of unsatisfying accuracy even with best-calibrated hydrodynamic models. One of the biggest uncertainty sources is the ...
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
On the Generalized Strongly Nil - Clean Property of the Matrix Rings
(World Scientific Publishing Company, 2021)
Let R be an associative unital ring and not necessarily commutative. We
analyzes conditions under which every n×n matrix A over R is expressible as a sum
A = E1 + ... +Es +N of (commuting) idempotent matrices Ei and a ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Biodesign inspired by the leaf and flower of dandelion (leontodon taraxacum l.)
(Published by the AFGS2021 Organizing Committee, 2021)
Bionics is a scientific field that studies the laws of origin and structure of "living"
nature in combination with knowledge of biology and technology. By applying bionics, sustainable solutions and answers to the great ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...