Претраживање
Приказ резултата 31-36 од 36
Structural concrete with partial or total cement replacemnet with fly ash / Konstrukcijski betoni sa delimičnom ili potpunom zamenom cementa elektrofilterskim pepelom
(Savez građevinskih inženjera Srbije, Beograd, 2015)
Building industry is facing with great challenges in directing its activities towards sustainable development. Environmental protection, the use of waste and recycled materials and reduction of the use of non-renewable ...
Long-term behavior of composite concrete girders made continuous
(MASE, 2011)
Time-dependent effects are significant for the design of range of concrete structures. Reliable data for creep and shrinkage properties of concrete and analytical procedures are needed to account for these effects. A number ...
Behaviour of Reinforced Concrete Beams Made with Recycled and Waste Materials Under Long-Term Loading
(Универзитет у Београду, Грађевински факултет, 2018)
Concrete is the second most-used material in the world after water and its productionplaces a large strain on natural resources and the environment. This has prompted thesearch for sustainable alternatives to traditional ...
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
Experimental investigation of basic concrete properties for 3D printing technology
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
The aim of this paper is an experimental investigation of fresh concrete properties of the mixture designed for 3D printing. Different mixtures with and without chemical additions (superplasticizer and hydration controller) ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...