Претраживање
Приказ резултата 31-40 од 101
Ski jump design
(Proceedings of the Institution of Civil Engineers-Water Management, 2010)
This paper is concerned with ski jump design for overflow dams and chute spillways. Despite the vast scope of literature on this subject, research in this field is still needed. Three important issues are addressed: take-off ...
Structural rehabilitation and stabilization of Smederevo fortress Tower 11
(MASE - Macedonian Association of Structural Engineers, Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2017)
This paper presents the structural rehabilitation and stabilization of Tower 11 of Smederevo фortress. The tower is tilted for about 1.8 m towards its outer edge, that is, towards the surrounding vertical walls that it was ...
Headed Shear Studs versus High-Strength Bolts in Prefabricated Composite Decks
(American Society of Civil Engineers (ASCE), 2016)
Prefabricated steel and concrete composite decks are an interesting option to improve competitiveness and sustainability of the composite structures. Longitudinal shear connection is usually established by grouped headed ...
Long-term behavior of continuous girders made from precast elements
(TTEM journal / Tecnics Technologies Education Management, 2014)
Glulam beams reinforced with internally positioned CFRP plates
(MASE - Macedonian Association of Structural Engineers, Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
In recent years the use of fiber reinforced polymer (FRP) composites for strengthening and repairing structural members has significantly increased. This paper presents an experimental study carried out in order to investigate ...
Experimental Investigation of Cracked End-notched Glulam Beams Repaired with GFRP bars
(Slovak Forest Products Research Institute, 2019)
In this paper, an experimental research on bending behaviour of end-notched glulam beams and their bending behaviour after repairing with glass fibre reinforced polymer (GFRP) bars is presented. Altogether five glulam beams ...
05.18: Maximum chord slenderness ratio of compressed stainless steel closely spaced built-up members
(CE/papers, Special Issue: Proceedings of Eurosteel 2017, 2017)
Verification of deflection according to Eurocode 2
(Wiley-Blackwell, 2017)
Code provisions for a simplified check of the long-term deflection of concrete structures are generally developed for predefined values of the relevant input parameters. Deflection calculation may be of interest to account ...
Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete
(PROCEEDINGS 6th International Conference on Renewable Electrical Power Sources, 2018)
Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is ...
08.30: Experimental investigation and specific behaviour of X-HVB shear connectors in prefabricated composite decks
(ce/papers, 2017)
Construction industry is constantly facing new demands towards fast construction and smallest possibly quantity of work at the construction site. These increasing demands, in the field of composite construction of buildings ...