Pretraživanje
Prikaz rezultata 31-40 od 95
Fizičko-mehanička svojstva betona visokih čvrstoća ojačanih čeličnim vlaknima (UHPSFRC)
(Zbornik radova sa Nacionalnog simpozijuma DGKS, Društvо građevinskih konstruktera Srbije, 2021)
Tema rada su betoni ultra visokih čvrstoća sa dodatkom čeličnih vlakana, u stručnoj literaturi poznati kao „Ultra-High Perfomance Steel Fibre Reinforced Concrete“ (UHPSFRC). U prvom delu rada prikazan je kratak istorijat ...
The Laboratory Investigations of High-Density Polyethylene Drains for Application in Tailings
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2020)
For the purposes of draining material deposited in the tailings pond under construction, there was a need to examine the properties of the high-density polyethylene drain tubes and the consisting materials in order to ...
Basic principles of 3D concrete printing in the light of sustainable development
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2021)
Although conservative, the construction industry must be transformed in line with new technologies. Adopting the concept of 3D printing can provide a handful of benefits in terms of creativity, flexibility, less waste ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
The new buckling curves for cold-formed stainless steel equal-leg angle columns
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
Pravila za proračun centrično pritisnutih elemenata ravnokrakog L poprečnog preseka od
nerđajućeg čelika nisu eksplicitno definisana u važećem evropskom standardu SRPS EN 1993-
1-4. Ovaj rad ukratko prikazuje ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...