Претраживање
Приказ резултата 41-50 од 60
Experimental and numerical study of structural damping in a beam with bolted splice connection
(Thin-Walled Structures, 2023)
The objective of this research is to develop a numerical model of one widely used bolted beam splice connection
that dissipates energy through structural damping. The reference experimental setup is carefully designed ...
Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements
(Springer, 2022)
Many (inter)national standards exist to evaluate the resistance of mortar and concrete to carbonation. When a carbonation coefficient is used for performance comparison of mixtures or service life prediction, the applied ...
Evaluation of Solidified Wastewater Treatment Sludge as a Potential SCM in Pervious Concrete Pavements
(MDPI, 2022)
Waste and recycled materials have recently been used in the construction industry to comply with the principles of circular economy and sustainable development. The aim of this paper is to examine the potentials of solidified ...
Performance of RC frames in 26.11.2019. Albania earthquake: effects of irregularities and detailing
(Society for Materials and Structures Testing of Serbia, Belgrade, SerbiaUniversity of Belgrade Faculty of Civil Engineering, Belgrade, SerbiaAssociation of Structural Engineers of Serbia, Belgrade, Serbia, 2021)
The collapse and damage of large number of buildings during the November 26,
2019 (Mw 6,4) Albania earthquake caused 51 fatalities and injuries to at least 910
people. Most of collapsed or heavily damaged ...
The Influence of Accelerated Carbonation on Physical and Mechanical Properties of Hemp-Fibre-Reinforced Alkali-Activated Fly Ash and Fly Ash/Slag Mortars
(MDPI, 2022)
The physical and mechanical properties of hemp-fibre-reinforced alkali-activated (AA) mortars under accelerated carbonation were evaluated. Two matrices of different physical and chemical properties, i.e., a low Ca-containing ...
Design of cross-laminated timber (CLT) floors for human-induced vibrations
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2023)
Cross-laminated timber (CLT) is an innovative engineering wood product made by gluing layers of solid timber boards placed in an orthogonally alternating orientation to the neighbouring layers. CLT panels provide an efficient ...
Service Life Design of Concrete Structures Made of High-Volume Limestone Powder Concrete—Case of the Carbonation-Induced Corrosion
(MDPI, Basel, Switzerland, 2023)
One of the paths to CO2 emissions reduction in the concrete industry is to use low-clinker cements, providing at the same time the performance of concrete that is adequate for application in concrete structures. This paper ...
Selection of wastewater treatment technology: AHP method in multi-criteria decision making
(MDPI, Basel, Switzerland, 2023)
Wastewater treatment is a process that reduces pollution to those quantities and concentrations at which purified wastewater is no longer a threat to human and animal health and safety and does not cause unwanted changes ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
Uticaj parametara strukture na trajnost hidrotehničkih betona
(Sfera d.o.o., 2021)