Претраживање
Приказ резултата 11-20 од 25
Vibration serviceability limit state of pedestrian bridges
(Society for Materials and Structures Testing of Serbia, 2021)
Modern conustructions of pedestrian bridges must satisfy functional and
increasingly complex architectural requirements. In order to achieve the attractive
design of pedestrian bridges, modern constructions generally ...
Effects of waste sulfur content on properties of self-compacting concrete
(Consejo Superior de Investigaciones Cientificas ^Instituto de Ciencias de la Construccion Eduardo Torroja, 2020)
Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea
of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore ...
The Influence of Accelerated Carbonation on Physical and Mechanical Properties of Hemp-Fibre-Reinforced Alkali-Activated Fly Ash and Fly Ash/Slag Mortars
(MDPI, 2022)
The physical and mechanical properties of hemp-fibre-reinforced alkali-activated (AA) mortars under accelerated carbonation were evaluated. Two matrices of different physical and chemical properties, i.e., a low Ca-containing ...
Primena grejnih kablova u izvođenju betonskih radova pri ekstremno niskim temperaturama sa numeričkim primerima
(Udruženje inženjera građevinarstva geotehnike arhitekture i urbanista, 2021)
Očvršćavanje betona u uslovima niskih temperatura dovodi do usporavanja procesa
hidratacije cementa. U ekstremnim uslovima može doći do prekidanja hidratacije cementa i
pojave smrzavanja vode u betonu. Sve to može dovesti ...
Application of Copper Mining Waste in Radionuclide and Heavy Metal Immobilization
(Wiley-VCH GmbH, Weinheim, 2021)
Copper slag flotation tailings (CSFT), as the end waste from copper mining, are evaluated for radionuclide and heavy metal immobilization. Characterization of CSFT based on grain size and mineral composition, surface ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...
Mechanically fastened shear connectors in prefabricated concrete slabs – experimental analysis
(Techno Press, 2020)
Nowadays, in prefabricated composite construction, composite action between steel beam and concrete slab is often achieved with positioning of shear connectors in envisaged openings of concrete slabs. Prefabricated concrete ...
Experimental investigation of end-notched glulam beams reinforced with GFRP bars
(Springer Nature, 2022)
End-notched timber beams can have a significant decrease in load-carrying capacity as a consequence of stress concentration due to height reduction at the supports. To prevent crack opening and its propagation at the ...
Determination of Mode I fracture properties of European spruce
(Wood Research, 2023)
In this paper an efficient procedure for obtaining a cohesive law for Mode I timber fracture (crack opening), based on the Double Cantilever Beam (DCB) tests is given. DCB tests were performed on ten European spruce specimens ...
Shear behaviour of demountable connections with bolts and headed studs
(The Hong Kong Institute of Steel Construction, 2023)
Following the trend of sustainable development and structure reuse, many novel solutions related to demountable shear connectors for application in steel-concrete composite beams have been proposed in recent years. This ...