Претраживање
Приказ резултата 31-40 од 54
The Potential of Waste and Recycled Materials for Application in Concrete Industry of Serbia
(SaTCIP Publisher Ltd., 2021)
The idea of sustainable development in engineering practice is not a new one, but it has become one of the most important topics of the 21st century. Concrete industry, as the producer of the leading global construction ...
Application of Copper Mining Waste in Radionuclide and Heavy Metal Immobilization
(Wiley-VCH GmbH, Weinheim, 2021)
Copper slag flotation tailings (CSFT), as the end waste from copper mining, are evaluated for radionuclide and heavy metal immobilization. Characterization of CSFT based on grain size and mineral composition, surface ...
Steel Structure Prediction Model for Fixed Roof Oil Tanks
(Wiley / Ernst & Sohn GmbH, 2021)
This paper will focus on fixed roof storage tanks and its sub-category cone roof tanks. Paper presents major factors and outputs of tank design process. Theoretical analysis is done for a cone roof tank model and correlation ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...
Influence of Cracks on the Carbonation Resistance of Recycled Aggregate Concrete
(Fib, 2021)
The use of recycled concrete aggregate (RCA) for the production of new concrete can be a promising eco-efficient solution. However, replacement of natural aggregate (NA) with RCA influences concrete’s durability performance. ...
Experimental investigation of end-notched glulam beams reinforced with GFRP bars
(Springer Nature, 2022)
End-notched timber beams can have a significant decrease in load-carrying capacity as a consequence of stress concentration due to height reduction at the supports. To prevent crack opening and its propagation at the ...
Possibilities for Application of Modified Solidified Water Treatment Sludge as Supplementary Cementitious Material
(RILEMSpringer, 2023)
The increased number of water treatment plants induces intensified production of water treatment sludge (WTS) that needs to be stabilized and reused. One of the possible stabilization processes is solidification, which ...
Physical and mechanical properties of Ultra-high- performance concrete with limestone
(Macedonian Association of Structural Engineers, 2022)
The production of ultra-high performance concrete is one of the new ideas in modern construction, developed in the past few decades. A compressive strength higher than 150 MPa has been achieved using a relatively large ...
Experimental determination of R curves for European spruce using DCB tests
(Proceedings from the 13th World Conference on Timber Engineering 2023, Oslo, 2023)
This paper presents an experimental procedure for obtaining the fracture resistance (R curve) of solid wood specimens made of spruce. Double Cantilever Beam (DCB) tests were performed in order to determine energy release ...
Rehabilitation of arch bridge across Lepenica river in Kragujevac
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
In this paper damages and rehabilitation of bridge across Lepenica River in Kragujevac are
presented. The bridge is reinforced concrete tied-arch structure. Main girders (two arches) have
a span of 31.5 m and they are ...