Search
Now showing items 1-10 of 48
Methods of damage detection of structures based on changes of dynamic characteristics / Metode detekcije oštećenja konstrukcija na osnovu promene dinamičkih karakteristika
(Savez građevinskih inženjera Srbije, Beograd, 2015)
The paper presents overview of damage detection of structures using non destructive test methods and corresponding optimization procedures for detection, localization and severity of damage. Change of a stiffness, as a ...
Methodology development for daylight simulation for highly glazed office space models in Belgrade climate conditions
(Nano, Bio and Green - Technologies for A Sustainable Future, Vol Ii (Sgem 2015), 2015)
In everyday architectural practice parameters affecting daylight are not often taken into account. Usually the relationship between opaque and transparent parts of the facade is defined by functional or aesthetic parameters ...
Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability / Analiza vezane energije i emisije CO2 za izvođenje mostovske konstrukcije sa stanovišta održivosti
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2015)
This paper presents a comparative analysis of embodied energy and CO2 emission, in the construction process of three bridge structures. Analyzed structures are prestressed concrete bridges with different structural systems ...
Analysis of hydrodynamic pressures in the stilling basin of an earth dam
(Serbian Water Pollution Control Society, Belgrade, 2015)
The stilling basin is one of the most frequently used energy dissipation structures due to highly-efficient energy dissipation of the main stream through the secondary turbulent flow in the hydraulic jump roller formed ...
Stainless steel cross-section resistance according to continuous strength method
(iNDiS 2015 Planiranje, projektovanje, građenje i obnova graditeljstva 13. međunarodna naučna konferencija, 2015)
Continuous strength method is a contemporary approach to calculation of resistance of stainless steel cross-sections which has been recently developed at the Imperial College of London. The basis of the method is the ...
Calibration of the bolt pretension by strain gauges vs. FEA
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
When applying high strength bolts in friction connections, in such case a load–bearing capacity depends on a pretension force in the bolts as well as on a friction coefficient found on friction surfaces. It is important ...
Numerical modeling of supercritical flow in closed conduit bend / Numeričko modeliranje burnog tečenja u krivini zatvorenog provodnika
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2015)
Numerical modeling of supercritical flow in closed conduit bend is a continuation of the scale model experiments. The main goal of application of numerical model is to extend the range of investigation and to simulate ...
Design recommendations of floor vibrations induced by human activities
(Macedonian Association of Structural Engineers, Skopje, 2015)
Structural engineers are now facing with new demands towards long spans, lightweight floors in steelconcrete composite construction and big open interiors. Thеsе new design trends аrе leading to the extensive problems ...
Overview of Sustainable Cementitious Composites Properties with Added Recycled Rubber
(Applied Mechanics and Materials, 2015)
The paper is focused to the properties of cementitious composites such as: mortar, ordinary concrete and self-compacting concrete made by means of recycled rubber granulate as a partial replacement for commonly used ...
Bending behaviour of glulam beams reinforced with carbon FRP plates
(Taylor and Francis Ltd., 2015)
The idea of reinforcing glued laminated timber (glulam) beams came in response to the need to improve the mechanical properties, as well as to ensure higher reliability of this type of structural elements. This paper ...