Претраживање
Приказ резултата 31-40 од 55
Bending behaviour of cross laminated timber panels made from locally sourced spruce wood
(MASE - Macedonian Association of Structural Engineers, 2023)
Cross laminated timber (CLT) is relatively new engineering wood product made by gluing cross-wise layers of solid timber boards to form large-scale panels. Due to excellent in-plane and out-of-plane resistance, CLT panels ...
Urban flood protection and stormwater removal: The development of the multifunctional porous pavement prototype
(University of Novi Sad, Faculty of Sciences, Department of Geography, tourism and hotel management, 2023)
Experimental determination of R curves for European spruce using DCB tests
(Proceedings from the 13th World Conference on Timber Engineering 2023, Oslo, 2023)
This paper presents an experimental procedure for obtaining the fracture resistance (R curve) of solid wood specimens made of spruce. Double Cantilever Beam (DCB) tests were performed in order to determine energy release ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...
Design of cross-laminated timber (CLT) floors for human-induced vibrations
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2023)
Cross-laminated timber (CLT) is an innovative engineering wood product made by gluing layers of solid timber boards placed in an orthogonally alternating orientation to the neighbouring layers. CLT panels provide an efficient ...
Primena strategije nultog otpada - Upotreba mulja sa postrojenja za prečišćavanje otpadne vode u građevinskim materijalima
(Udruženje za tehnologiju vode i sanitarno inženjerstvo, 2023)
U ovom radu ispitani su različiti tipovi kompozitnih materijala, koji su po sastavu većim delom od cementa, a jednim delom od recikliranog otpadnog praškastog materijala, neutrala. Ispitivanja su obuhvatila uticaj kompozitnih ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
Service Life Design of Concrete Structures Made of High-Volume Limestone Powder Concrete—Case of the Carbonation-Induced Corrosion
(MDPI, Basel, Switzerland, 2023)
One of the paths to CO2 emissions reduction in the concrete industry is to use low-clinker cements, providing at the same time the performance of concrete that is adequate for application in concrete structures. This paper ...
Contribution of strain-hardening cementitious composites (SHCC) to shear resistance in hybrid reinforced concrete beams
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Univerzitet u Beogradu, Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2023)
Strain Hardening Cementitious Composite (SHCC) is an innovative type of fibre-reinforced cement-based composite that has superior tensile properties. Because of this, it holds the potential to enhance the shear capacity ...
Solidified waste water treated sludge as partial replacement of cement in concete composites
(Macedonian Association of Structural Engineers, 2023)
In this research, tests of mortar and porous concrete made with solidified waste water treatment sludge (SWWTS) used in two forms as a partial replacement of cement were carried out. SWWTS mainly consisted out of CaCO3 and ...