Search
Now showing items 1-10 of 40
Cathode Ray Tube Waste Glass in Concrete Preparation - Increasing Sustainability
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2023)
The construction sector is responsible for approximately 39% of energy use and process-related carbon dioxide emissions. Mixing waste materials into concrete, as a substitute for cement
and/or aggregate, increases energy ...
Hardened properties of 3D printed concrete - experimental investigation
(Macedonian Association of Structural Engineers, 2023)
At the end of the last century, 3D printing of concrete became an innovative method for producing
concrete structures. The beginning of the application of 3D printing in the concrete construction industry is referred to ...
Behaviour and design of bolted connectors with mechanical coupler: an overview
(Proceedings of the 20th International Symposium of the Macedonian Association of Structural Engineers (MASE), Skopje, September 28-29, 2023., 2023)
The construction industry is one of the most important parts of economic development of society but it
also has a very negative impact on the environment. Using the three concepts of circular economy: reuse,
reduce and ...
Concrete modeling in finite element push-out test simulations
(MASE - Macedonian Association of Structural Engineers, Skopje, 2023)
Push-out tests are commonly used to investigate the shear performance of mechanical connectors
applicable in steel-concrete composite beams. These tests can be complemented by numerical finite element simulations to reduce ...
Local behaviour of the connector with mechanical coupler and rebar anchor under tension load
(Society for Materials and Structures Testing of Serbia; Faculty of Civil Engineering, University of Belgrade, Serbia; Association of Structural Engineers of Serbia, 2023)
In the past few decades, demountable connectors have often been used for
connections in composite and mixed steel-concrete structures to reduce
construction time and costs. Furthermore, the application of demountable
connectors ...
Residential Building Stock in Serbia: Classification and Vulnerability for Seismic Risk Studies
(Bulletin of Earthquake Engineering, 2023)
Regional seismic risk assessment is necessary for designing effective seismic risk mitigation measures. In general, such risk assessment studies consist of three components: hazard, vulnerability, and exposure modelling. ...
Risk management in civil engineering
(Society for Materials and Structures Testing of Serbia Faculty of Civil Engineering, University of Belgrade, Serbia Association of Structural Engineers of Serbia, 2023)
Risk is involved in the whole lifecycle of a structure: design, construction, utilization and demolition. There is a close connection between reliability and risk. Contemporary building codes introduce consideration of the ...
Shear design of circular concrete sections according to the EC2 truss model
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Shear design in Eurocode 2 is generally developed for rectangular sections or T-sections that have
clearly defined tension reinforcement, concentrated in the cross-sectional tension zone, and an
unambiguous width of ...
Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation
(IRASA – International Research Academy of Science and Art Belgrade, 2023)
The applicability of solid bricks waste in geopolymerization technique was considered. Waste samples were characterized in terms of mineralogical composition by XRD prior to mechanical testing. XRD analysis showed that ...