Претраживање
Приказ резултата 1-10 од 28
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Image Processing for Hydraulic Jump Free-Surface Detection
(IAHR, 2019)
Hydraulic jumps exhibit a high degree of free-surface oscillations, triggered by intense turbulence and aeration.
These processes are difficult to model numerically and are frequently investigated on a scale model. ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Influence of Loading Cracks on the Carbonation Resistance of RC elements
(Elsevier, 2019)
In reinforced concrete (RC) structures, carbonation induced corrosion is one of the most significant durability issues. A very important factor that affects the carbonation process is the appearance of cracks in RC structures. ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Experimental investigation of compressed stainless steel angle columns
(International Colloquium on Stability and Ductility of Steel Structures, 2019)
This paper presents the experimental programme of an extensive research project that deals with analysing the behaviour of compressed stainless steel columns with equal angle sections. The research focuses on different ...
Detekcija nivoa u laboratorijskim kanalima primenom tehnike obrade slika
(Srpsko društo za odvodnjavanje i navodnjavanje, 2019)
Određivanje i praćenje promena nivoa vode u laboratorijskim uslovima primenom tradicionalnih mernih metoda opterećeno je raznim nedostacima: tačnost, frekvencija uzorkovanja, inertnost mernog uređaja i osetljivost na spoljne ...
Radiological and material characterization of high volume fly ash concrete
(Journal of Environmental Radioactivity, 2016)
The main goal of research presented in this paper was the material and radiological characterization of high volume fly ash concrete (HVFAC) in terms of determination of natural radionuclide content and radon emanation and ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...