Search
Now showing items 11-20 of 23
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Different Profiled Sheeting Configurations in Steel-Concrete Composite Beams
(Ernst & Sohn GmbH, 2022)
For obtaining shear resistance of a welded headed stud in profiled steel sheeting, EN 1994-1-1:2004 defines reduction factors that should be multiplied with the resistance of a headed stud in a solid concrete slab. Two ...
Numerical characterization of innovative demountable beam-column connections using long bolts
(Proceedings in Civil Engineering, XIV CONGRESSO DE CONSTRUÇÃO METÁLICA E MISTA, Convento São Francisco, Coimbra – Portugal, 23-24 November, 2023, 2023)
Circular design strategies such as adaptivity, detachability, and reusability represent
new challenges and increased demands on the future-proof buildings sector. To contribute to
the circularity and sustainability of ...