Pretraživanje
Prikaz rezultata 21-30 od 42
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Alkali-activated concrete with Serbian fly ash and its radiological impact
(Elsevier, 2016)
The present paper reports the results of a study on different types of fly ash from Serbian coal burning power plants and their potential use as a binder in alkali-activated concrete (AAC) depending on their radiological ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Shear behaviour of recycled aggregate concrete beams with and without shear reinforcement
(Engineering Structures, 2017)
An experimental study of the shear behaviour of recycled aggregate concrete (RAC) beams with and without shear reinforcement is presented. Nine full-scale simply supported beams were loaded in four-point bending tests until ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Deflection control for reinforced recycled aggregate concrete beams: Experimental database and extension of the fib Model Code 2010 model
(Structural Concrete, 2019)
Recycled aggregate concrete (RAC) has emerged as a viable solution for
solving some of the environmental problems of concrete production.
However, design guidelines for deflection control of reinforced RAC
members have ...