Pretraživanje
Prikaz rezultata 11-20 od 45
The Impact of Recycled Concrete Aggregate on the Stiffness, Fatigue, and Low-Temperature Performance of Asphalt Mixtures for Road Construction
(MDPI, 2020)
The need for road (re)construction materials is constantly growing. At the same time, there
is a limited quantity of new, high-quality materials available and a buildup of secondary/recycled
construction materials. One ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...