Претраживање
Приказ резултата 11-20 од 22
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Novo tehničko rešenje baze podataka o mostovima u Republici Srbiji
(Put i saobracaj, 2020)
Radi efikasnog održavanja mostova, u svetu su razvijeni sistemi održavanja mostova(Bridge management system –BMS). U cilju unapređenja i daljeg razvoja, JP Putevi Srbije su inicirali projekat pod ...
Effects of waste sulfur content on properties of self-compacting concrete
(Consejo Superior de Investigaciones Cientificas ^Instituto de Ciencias de la Construccion Eduardo Torroja, 2020)
Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea
of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC
(Springer, 2020)
Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. ...
Mechanically fastened shear connectors in prefabricated concrete slabs – experimental analysis
(Techno Press, 2020)
Nowadays, in prefabricated composite construction, composite action between steel beam and concrete slab is often achieved with positioning of shear connectors in envisaged openings of concrete slabs. Prefabricated concrete ...