Претраживање
Приказ резултата 1-10 од 23
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Sustainability-Oriented Multi-Criteria Analysis of Different Continuous Flight Auger Piles
(MDPI, 2021)
With increasing construction activity and concrete consumption globally, the economic,
environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is
imperative to assess the choice ...
Upravljanje čvrstim otpadom u domenu armiranobetonskih elemenata ojačanih karbonskim tkaninama
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista „Izgradnja“, 2021)
U doba kada raspoloživost resursa postaje jedan od rastućih problema u svetu, javlja se potreba kako za reciklažom, tako i za upravljanjem čvrstim otpadom u koji, između ostalog, spada i građevinski otpad. Efektivno ...
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Numerical parametric study on steel-concrete composite floor beams vibrations due to pedestrian traffic
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
Human perception of floor vibrations and uncompromised serviceability of equipment are two most important acceptability criteria considering floor vibrations. While verification of deflection is a simple and well-known ...