Претраживање
Приказ резултата 1-10 од 12
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Image processing for hydraulic jump free-surface detection: coupled gradient/machine learning model
(IOP, 2020)
High-frequency oscillations and high surface aeration, induced by the strong turbulence, make water depth measurement for hydraulic jumps a persistently challenging task. The investigation of the hydraulic jump behaviour ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...