Претраживање
Приказ резултата 21-30 од 78
Long-term thermal two- and three-dimensional analysis of roller compacted concrete dams supported by monitoring verification
(Canadian Journal of Civil Engineering, 2010)
This paper presents two-dimensional (2D) and three-dimensional (3D) numerical models for unsteady phased thermal analysis of RCC dams. The time evolution of a thermal field has been modeled using the actual dam shape, RCC ...
Ski jump design
(Proceedings of the Institution of Civil Engineers-Water Management, 2010)
This paper is concerned with ski jump design for overflow dams and chute spillways. Despite the vast scope of literature on this subject, research in this field is still needed. Three important issues are addressed: take-off ...
Long-term behavior of continuous girders made from precast elements
(TTEM journal / Tecnics Technologies Education Management, 2014)
Experimental Investigation of Cracked End-notched Glulam Beams Repaired with GFRP bars
(Slovak Forest Products Research Institute, 2019)
In this paper, an experimental research on bending behaviour of end-notched glulam beams and their bending behaviour after repairing with glass fibre reinforced polymer (GFRP) bars is presented. Altogether five glulam beams ...
05.18: Maximum chord slenderness ratio of compressed stainless steel closely spaced built-up members
(CE/papers, Special Issue: Proceedings of Eurosteel 2017, 2017)
Static behaviour of bolted shear connectors with mechanical coupler embedded in concrete
(Techno Press, 2018)
The research of shear connectors composed from mechanical couplers with rebar anchors, embedded in concrete, and steel bolts, as a mean of shear transfer in composite connections is presented in the paper. Specific issues ...
Verification of deflection according to Eurocode 2
(Wiley-Blackwell, 2017)
Code provisions for a simplified check of the long-term deflection of concrete structures are generally developed for predefined values of the relevant input parameters. Deflection calculation may be of interest to account ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...