Претраживање
Приказ резултата 1-10 од 118
Rehabilitation of arch bridge across Lepenica river in Kragujevac
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
In this paper damages and rehabilitation of bridge across Lepenica River in Kragujevac are
presented. The bridge is reinforced concrete tied-arch structure. Main girders (two arches) have
a span of 31.5 m and they are ...
Experimental testing of 3D printed concrete truss girder
(Proceedings of The 9th International Conference ''Civil Engineering Science & Practice'' GNP 2024, Kolašin, Montenegro, 5-9 March, 2024, 2024)
In the last few decades, the technology of 3D concrete printing (3DCP) has had a significant
development. This technology has a great potential to improve efficiency in the construction
industry. It can provide safer ...
Environment Protection – International Regulation
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
In this article, the authors analyze phases of the development of international environmental law, stating the main features of each, and the relevant international instruments adopted in this area. Special emphasis is put ...
Recycled Coarse Aggregate and Fly Ash Effect on Compressive Strength of Self-Compacting Concrete
(University of Belgrade ‐ Technical Faculty in Bor, 2021)
The paper presents experimental results of the tests conducted on Self-Compacting Concrete (SCC) with recycled coarse aggregate, and fly ash as filler component. A fine fraction of aggregate originated from a riverbed, ...
Investigation of the mechanical, hydrophysical and thermotechnical properties of porous lightweight aggregate concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije I Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
The results of comparative testing of porous lightweight aggregate concrete made with various percentages of neutral as a partial replacement of cement are presented in this paper. Neutral represents non-hazardous, inert ...
The effect of thermal treatment on mechanical and deformation properties of steel reinforcement
(University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy, 2022)
Presented research was intentioned to clarify the effects of thermal treatment (ageing) of reinforcing steel products on their mechanical and deformation properties. In order to determine the effect of temperature, samples ...
Experimental responses of compressed I-section short columns with web openings
(Novi Sad : Faculty of Technical Sciences, 2023)
This paper reports the experimental study on compressed I-section short columns with web openings aimed at providing insight on the specific mechanical behaviour underlying the local buckling of the web panel around the ...
Sanacija AB dimnjaka u toplani Konjarnik u Beogradu
(Univerzitet u Beogradu Građevinski fakultet, 2022)
Armiranobetonski dimnjak u Toplani Konjarnik u Beogradu je, sagrađen oko 1975. godine. Predmetni dimnjak u odnosu na površinu trotoara izvedenog oko njega ima visinu od 96,00m. U unutrašnjosti dimnjaka, bez dodira sa ...
Утицај Електрофилтерског Пепела на Чврстоћу Cамоуграђујућег Бетона при Притиску
(Arhitektonsko-građevinsko-geodetski fakultet Univerziteta u Banjoj Luci, 2023)
Индустрија цемента сматра се једним од значајнијих узрочника емисије СО2. У циљу изналажења рјешења овој проблематици у раду се предлаже замјена 17,5% потребне количине цемента за производњу самоуграђујућег бетона минералним ...
Principal Component Analysis of Morphological Descriptors for Assessment of Surface Defects Induced by Extreme Conditions
(Association of Metallurgical Engineers of Serbia (AMES), Kneza Miloša 9/IV, 11000 Belgrade, Serbia, 2023)
Implementation of statistical analysis for monitoring the formation and propagation of defects that occurred due to exposure of the material to thermal shock and cavitation is presented in this study. Results of two groups ...