Претраживање
Приказ резултата 81-90 од 526
Specific behaviour of thin-walled member joints with fasteners
(Croatian Association of Civil Engineers, 2012)
Due to small plate thickness, thin-walled members are characterized by some specific features. The theoretical and experimental study of behaviour of thin-walled member connections with mechanical fasteners, bolts and ...
Design of pedestrian bridge according to Eurocode 9
(Društvo građevinskih konstruktera Srbije, Beograd, 2018)
Aluminum alloys, due to its numerous advantages, is widely used in the construction of various types of structures in civil engineering. Design of pedestrian bridge, entirely constructed of extruded elements made of aluminum ...
Tailwater Influence on the Hydrodynamic Pressures in the Stilling Basin / Uticaj nivoa donje vode na hidrodinamičke pritiske u slapištu
(Građevinski fakultet, Subotica, 2014)
This paper analyzes the hydrodynamic loads acting on the bottom and walls of a stilling basin, based on the pressure measurements at the selected points of a scale model. For different degrees of the hydraulic jump immersion, ...
Physical and Mechanical Properties of Concrete Cured at Low Temperatures
(Business Technical College, Uzice, 2017)
The paper reports the results of experimental tests of physical and mechanical properties of concrete which hardened in cold weather conditions without curing, without protection against precipitation and also without ...
Modelling of masonry infill using a commercial computer software / Modeliranje zidane ispune primenom komercijalnog računarskog programa
(Univerzitet u Banjaluci, Arhitektonsko-građevinsko-geodetski fakultet, Banja Luka, 2014)
Daylight utilisation potentials of highly glazed individual office spaces in Belgrade climate condition
(Society of Thermal Engineers of Serbia, Belgrade, 2016)
Air-water flow on a labyrinth spillway
(Serbian Water Pollution Control Society, Belgrade, 2014)
The design of the Beni Slimane Dam (Medea Province, Algeria) was verified by scale model analyses, conducted on two separate scale models: a partial model of labyrinth spillway and a complete model of spillway structures. ...
Hardened properties of 3D printed concrete - experimental investigation
(Macedonian Association of Structural Engineers, 2023)
At the end of the last century, 3D printing of concrete became an innovative method for producing
concrete structures. The beginning of the application of 3D printing in the concrete construction industry is referred to ...
Numerical and experimental analysis of structural damping for bolted splice connection joint
(Contemporary achievements in civil engineering 22-23. April 2021. Subotica, SERBIA,8th INTERNATIONAL CONFERENCE, 2021)
This paper presents the finite element modeling of bolted joints for structural
dynamic analysis to achieve a reasonable accuracy in simulation results. Non-linear
effects in splice connected joints involve normal ...
Moždanici sa glavom mogućnosti i ograničenja primene u zgradarstvu
(Društvo građevinskih konstruktera Srbije, Beograd, 2018)