Претраживање
Приказ резултата 121-130 од 168
Specifičnosti ponašanja smičućih spojeva ostvarenih različitim vrstama moždanika
(Beograd: Univerzitet u Beogradu, Građevinski fakultet ; Podgorica: Univerzitet Crne Gore, Građevinski fakultet, 2016)
Extension of the ζ-method for calculating deflections of two-way slabs based on linear elastic finite element analysis
(wileyonlinelibrary.comfib. International Federation for Structural Concrete, 2021)
Deflections are among the most complex aspects of reinforced concrete behavior.
Furthermore, deflection control is increasingly a governing criterion in
design, especially in the case of two-way members such as flat slabs ...
Environmental assessment of green concretes for structural use
(Elsevier Ltd, 2017)
This paper presents a comparative environmental assessment of several different green concrete mixes for structural use. Four green concrete mixes were compared with a conventional concrete mix: recycled aggregate concrete ...
Long-term behaviour of reinforced beams made with natural or recycled aggregate concrete and high-volume fly ash concrete
(Elsevier Ltd, 2018)
Six simply supported reinforced concrete beams were tested under sustained loads for 450 days. The beams were made from natural aggregate concrete (NAC), recycled aggregate concrete (RAC) and high volume fly ash concrete ...
Life cycle assessment (LCA) aspects of concrete
(Elsevier Ltd., 2013)
The concrete industry is considered to be a large consumer of energy and natural resources, and is one of the main sources of greenhouse emissions and waste generation. The production and utilization of concrete and concrete ...
Rehabilitation of arch bridge across Lepenica river in Kragujevac
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
In this paper damages and rehabilitation of bridge across Lepenica River in Kragujevac are
presented. The bridge is reinforced concrete tied-arch structure. Main girders (two arches) have
a span of 31.5 m and they are ...
Experimental testing of 3D printed concrete truss girder
(Proceedings of The 9th International Conference ''Civil Engineering Science & Practice'' GNP 2024, Kolašin, Montenegro, 5-9 March, 2024, 2024)
In the last few decades, the technology of 3D concrete printing (3DCP) has had a significant
development. This technology has a great potential to improve efficiency in the construction
industry. It can provide safer ...
Life cycle analysis of recycled aggregate concrete with fly ash as partial cement replacement
(Expanding Boundaries: Systems Thinking in the Built Environment, 2016)
This paper presents a part of the results obtained within the frame of the SCOPES joint research project - a scientific collaboration between ETH Zurich and Faculty of Civil Engineering, University of Belgrade. One of the ...
Life cycle assessment (LCA) of concrete made using recycled concrete or natural aggregates
(Elsevier Inc., 2013)
This chapter is devoted to comparative environmental assessment of structural concrete made with recycled concrete aggregates and structural concrete made with natural aggregates. The results of life cycle assessment of ...
Determination of Mode I fracture properties of European spruce
(Wood Research, 2023)
In this paper an efficient procedure for obtaining a cohesive law for Mode I timber fracture (crack opening), based on the Double Cantilever Beam (DCB) tests is given. DCB tests were performed on ten European spruce specimens ...