Претраживање
Приказ резултата 1-10 од 17
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Different Profiled Sheeting Configurations in Steel-Concrete Composite Beams
(Ernst & Sohn GmbH, 2022)
For obtaining shear resistance of a welded headed stud in profiled steel sheeting, EN 1994-1-1:2004 defines reduction factors that should be multiplied with the resistance of a headed stud in a solid concrete slab. Two ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...