Претраживање
Приказ резултата 1-10 од 13
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...