Претраживање
Приказ резултата 1-10 од 23
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Methods for Life Extension of Multi-Storey Car Park Buildings
(Taylor and Francis, 2022)
Multi-storey car park buildings with steel–concrete composite floor structures are widespread in construction due to the distinct benefits of the implemented structural system. Although there are various possibilities for ...
Different Profiled Sheeting Configurations in Steel-Concrete Composite Beams
(Ernst & Sohn GmbH, 2022)
For obtaining shear resistance of a welded headed stud in profiled steel sheeting, EN 1994-1-1:2004 defines reduction factors that should be multiplied with the resistance of a headed stud in a solid concrete slab. Two ...
Flexural behaviour and ultimate bending capacity of high-volume fly ash reinforced concrete beams
(Engineering Structures, 2023)
Large number of studies analyzed physical and mechanical properties of high-volume fly ash concrete, but only a few discussed its structural behavior. Material properties are an important input parameter for structural ...