Претраживање
Приказ резултата 1-9 од 9
Experimental investigation of the construction joint in concrete ground floors
(University of Montenegro, Faculty of Civil Engineering, 2024)
Ground floors of industrial buildings, fully supported on the ground or piles, are usually made
of several concrete segments connected through free-movement construction joints. These joints
should provide shear load ...
Development of a tool for measuring the effect of surface roughness on steel structural response
(University of Montenegro Faculty of Civil Engineering, 2024)
Driven by the industry's needs to address energy dissipation issues in mechanical connections,
the set goals of the global scientific community, and previous research efforts to interpret how
the condition of contact ...
Analytic and experimental determination impulse response of single degree of freedom system
(University of Montenegro Faculty of Civil Engineering, 2024)
The paper presents an experimental and analytical way of determining the impulse response of
a linear time-invariant damped system with one degree of freedom.
An experiment was conducted where the mass was excited by an ...
Direct laser dynamic displacement measurement of structural response during testing
(University of Montenegro Faculty of Civil Engineering, 2024)
The paper presents part of the conducted research on laser-displacement sensors for the
measurement of structural response in civil engineering applications. Usually, the level of
displacement in laboratory or on-site ...
Structural fire resistance design of the football stadium roof steel structure
(University of Montenegro Faculty of Civil Engineering, 2024)
When analysing the fire resistance of the steel structure of the stadium roof in the event of a fire,
the specific features of the stadium building must be taken into consideration. The stadium stands
are open units of ...
Prediction model for calculation of the limestone powder concrete carbonation depth
(Elsevier Ltd, 2024)
The efficient way to mitigate the impact of the concrete industry on climate change is to reduce the clinker content in the concrete mix. Beside incorporating supplementary cementitious materials (SCMs), it is possible to ...
Experimental testing of 3D printed concrete truss girder
(Proceedings of The 9th International Conference ''Civil Engineering Science & Practice'' GNP 2024, Kolašin, Montenegro, 5-9 March, 2024, 2024)
In the last few decades, the technology of 3D concrete printing (3DCP) has had a significant
development. This technology has a great potential to improve efficiency in the construction
industry. It can provide safer ...
Effect of rib-to-beam angle on the shear resistance of headed studs in composite slab
(Elsevier, 2024)
Headed stud shear connectors are commonly implemented in steel-concrete composite floors for connecting the concrete slab to the steel beam and providing composite action between those two elements. The orientation of ...
Design cross-section resistances of perforated columns under compression
(University of Montenegro, Faculty of Civil Engineering, 2024)
Nowadays, numerous experimentally, numerically and analytically based research have been
performed to evaluate the structural responses and ultimate capacity of beams with web
openings, but mostly under bending. However, ...