Претраживање
Приказ резултата 1-10 од 23
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Sustainability-Oriented Multi-Criteria Analysis of Different Continuous Flight Auger Piles
(MDPI, 2021)
With increasing construction activity and concrete consumption globally, the economic,
environmental, and social impacts of human activities continue to increase rapidly. Therefore, it is
imperative to assess the choice ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Upravljanje čvrstim otpadom u domenu armiranobetonskih elemenata ojačanih karbonskim tkaninama
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista „Izgradnja“, 2021)
U doba kada raspoloživost resursa postaje jedan od rastućih problema u svetu, javlja se potreba kako za reciklažom, tako i za upravljanjem čvrstim otpadom u koji, između ostalog, spada i građevinski otpad. Efektivno ...
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...
Stability design criteria for closely spaced built-up stainless steel columns
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper aims to develop design recommendations for closely spaced built-up stainless steel columns, based on findings gained in performed research at the University of Belgrade. The research focuses on pin-ended built-up ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...