Pretraživanje
Prikaz rezultata 1-10 od 22
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Potential of Natural and Recycled Concrete Aggregate Mixtures for Use in Pavement Structures
(MDPI, 2020)
This study investigates the feasibility of using recycled concrete aggregate (RCA) as a partial substitution of natural aggregate in pavement engineering. Despite RCA’s good properties, such as polishing value and freeze-thaw ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Prikaz vanrednog prevoza na putnoj mreži Republike Srbije
(Srpsko društvo za puteve, 2020)
U radu je dat prikaz vanrednog prevoza na putnoj mreži Republike Srbije. Razmatrane su dozvole za vanredni prevoz koje izdaje javno preduzeće Putevi Srbije za dva reprezentativna meseca april i septembar u 2019. godini. ...
The Impact of Recycled Concrete Aggregate on the Stiffness, Fatigue, and Low-Temperature Performance of Asphalt Mixtures for Road Construction
(MDPI, 2020)
The need for road (re)construction materials is constantly growing. At the same time, there
is a limited quantity of new, high-quality materials available and a buildup of secondary/recycled
construction materials. One ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...