Pretraživanje
Prikaz rezultata 1-10 od 22
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Out-of-plane behaviour of loadbearing and non-structural masonry walls during recent earthquakes
(University of Zagreb ,Faculty of Civil Engineering, 2021)
Recent earthquakes in Balkan, including the September 21 and November 26, 2020 Albania
earthquakes, March 22, 2020 Zagreb earthquake, and the December 29, 2020 Petrinja, Croatia
earthquakes had devastating consequences ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Experimental response of hot-rolled stainless steel angle columns
(Thin-Walled Structures, 2021)
This paper reports on experiments addressing the buckling and collapse behaviour of pin-ended hot-rolled stainless steel equal-leg angle columns under pure axial compression, aiming to provide reliable experimental data ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Effect of accelerated carbonation on the efficiency of immobilization of Cs in the alkaliactivated blast furnace slag
(Slovenian National Building and Civil Engineering Institute (ZAG), 2021)
In this paper the effect of accelerated carbonation process on the effectiveness of immobilization of cesium (simulated radioactive and toxic waste) in the alkali-activated blast furnace slag (AABFS) matrix was studied. ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Numerical modelling of end-notched glulam beams reinforced with GFRP bars
(Centro UC de Innovacion en Madera, 2021)
Load carrying capacity of end-notched timber beams can be significantly decreased depending on the geometry of notches. Concentration of tensile stresses perpendicular to grain and shear stresses at the notch corner can ...