Search
Now showing items 1-10 of 34
Cathode Ray Tube Waste Glass in Concrete Preparation - Increasing Sustainability
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2023)
The construction sector is responsible for approximately 39% of energy use and process-related carbon dioxide emissions. Mixing waste materials into concrete, as a substitute for cement
and/or aggregate, increases energy ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
New Eurocode 4 design rules for composite beams with precast concrete slabs
(Ernest & Sohn a Willey Brands, 2023)
As members of Project Team SC4.T5, the authors of this paper present the main outcomes from the work that isintended for implementation within the second generation of Eurocode 4. General design and application ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Hardened properties of 3D printed concrete - experimental investigation
(Macedonian Association of Structural Engineers, 2023)
At the end of the last century, 3D printing of concrete became an innovative method for producing
concrete structures. The beginning of the application of 3D printing in the concrete construction industry is referred to ...
Behaviour and design of bolted connectors with mechanical coupler: an overview
(Proceedings of the 20th International Symposium of the Macedonian Association of Structural Engineers (MASE), Skopje, September 28-29, 2023., 2023)
The construction industry is one of the most important parts of economic development of society but it
also has a very negative impact on the environment. Using the three concepts of circular economy: reuse,
reduce and ...
Concrete modeling in finite element push-out test simulations
(MASE - Macedonian Association of Structural Engineers, Skopje, 2023)
Push-out tests are commonly used to investigate the shear performance of mechanical connectors
applicable in steel-concrete composite beams. These tests can be complemented by numerical finite element simulations to reduce ...
The importance of Daylight Savings Time for energy savings in Belgrade latitude and climate
(8th International Academic Conference on Places and Technologies, Belgrade, Serbia, 19th to 21st October 2023, 2023)
The idea of Daylight Saving Time (DST) was introduced before electrification era in order to prolong diurnal use of daylight during summer. DST has been imposed in European legislation since year 2000, but the legislation ...
Утицај Електрофилтерског Пепела на Чврстоћу Cамоуграђујућег Бетона при Притиску
(Arhitektonsko-građevinsko-geodetski fakultet Univerziteta u Banjoj Luci, 2023)
Индустрија цемента сматра се једним од значајнијих узрочника емисије СО2. У циљу изналажења рјешења овој проблематици у раду се предлаже замјена 17,5% потребне количине цемента за производњу самоуграђујућег бетона минералним ...
Principal Component Analysis of Morphological Descriptors for Assessment of Surface Defects Induced by Extreme Conditions
(Association of Metallurgical Engineers of Serbia (AMES), Kneza Miloša 9/IV, 11000 Belgrade, Serbia, 2023)
Implementation of statistical analysis for monitoring the formation and propagation of defects that occurred due to exposure of the material to thermal shock and cavitation is presented in this study. Results of two groups ...