Претраживање
Приказ резултата 1-10 од 20
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Effects of natural zeolite addition on the properties of lime putty-based rendering mortars
(Elsevier, 2021)
The application of locally available component materials (lime putty and zeolitic rock as pozzolanic admixture) in two types of rendering mortars (designed for inner and outer render layer), was assessed through TG/DTA, ...
Experimental study of laser-welded stainless steel angle columns
(Thin-Walled Structures, 2021)
Substantial research has been conducted in the last years into the structural responses of cold-formed and hot-rolled stainless steel equal-leg angle columns, whereas there is no experimental data on laser-welded stainless ...
Effects of waste sulfur content on properties of self-compacting concrete
(Consejo Superior de Investigaciones Cientificas ^Instituto de Ciencias de la Construccion Eduardo Torroja, 2020)
Self-compacting concrete (SCC) contains fine mineral fillers such as limestone powder. The idea
of this study was to partially replace limestone with waste sulfur since it is hydrophobic, insoluble in water and therefore ...
Valorization of Fly Ash from a Thermal Power Plant for Producing High - Performance Self-Compacting Concrete
(Science of Sintering, 2020)
This study analyzes the feasibility of valorizing industrial by - product, fly ash from a thermal power plant as a partial replacement of mineral filler - limestone for the production of self-compacting concrete (SCC). ...
Waste Sulfur as a Partial Filler Replacement in Self-Placing Concrete
(University of Zenica, Faculty of Metallurgy and Technology, Travnička cesta 1, 72000 Zenica Bosnia and Herzegovina, 2021)
The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated ...
Thermomechanical behavior of bio-fiber composite thermal insulation panels
(Elsevier, 2020)
The thermomechanical properties of the bio-fiber composite, as material for the production of thermal insulation panels, were evaluated. The observed mixtures were composed of Miscanthus X giganteus bio-fibers, mineral ...
Evaluation of Concrete Cover Depth for Green Concretes Exposed to Carbonation
(John Wiley & Sons Ltd, 2020)
Carbonation resistance of fly ash concrete (FAC) and recycled aggregate concrete (RAC) has been extensively tested in the past decade, but there are still no recommendations for their application in codes of practice. ...
Design criteria for pin-ended hot-rolled and laser-welded stainless steel equal-leg angle columns
(Thin-Walled Structures, 2021)
This paper explores an attempt to investigate the structural behaviour and design of equal-leg stainless steel angle columns fabricated by the laser-welding of individual hot-rolled plates and by hot-rolling process. The ...