Pretraživanje
Prikaz rezultata 1-10 od 28
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
New Eurocode 4 design rules for composite beams with precast concrete slabs
(Ernest & Sohn a Willey Brands, 2023)
As members of Project Team SC4.T5, the authors of this paper present the main outcomes from the work that isintended for implementation within the second generation of Eurocode 4. General design and application ...
Out-of-plane behaviour of loadbearing and non-structural masonry walls during recent earthquakes
(University of Zagreb ,Faculty of Civil Engineering, 2021)
Recent earthquakes in Balkan, including the September 21 and November 26, 2020 Albania
earthquakes, March 22, 2020 Zagreb earthquake, and the December 29, 2020 Petrinja, Croatia
earthquakes had devastating consequences ...
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
A numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection joint
(THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegro, 2020)
The aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an ...
Review of basic concepts of contact mechanics of frictionless contact with emphasis on penalty method
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Problems involving contact are of great importance in industry related to mechanical and civil
engineering, but also in biomechanics and other applications. The contact interaction between
surfaces and different bodies ...
The Behaviour of Shear Anchors with Different Grout Properties
(Ernst&Sohn, 2021)
During the assembling of a steel structure with anchors, grout should be used in connections be-
tween steel elements and a reinforced concrete support element. In horizontal and vertical joints,
grout is used as a good ...
Effect of accelerated carbonation on the efficiency of immobilization of Cs in the alkaliactivated blast furnace slag
(Slovenian National Building and Civil Engineering Institute (ZAG), 2021)
In this paper the effect of accelerated carbonation process on the effectiveness of immobilization of cesium (simulated radioactive and toxic waste) in the alkali-activated blast furnace slag (AABFS) matrix was studied. ...