Претраживање
Приказ резултата 1-10 од 15
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Different Profiled Sheeting Configurations in Steel-Concrete Composite Beams
(Ernst & Sohn GmbH, 2022)
For obtaining shear resistance of a welded headed stud in profiled steel sheeting, EN 1994-1-1:2004 defines reduction factors that should be multiplied with the resistance of a headed stud in a solid concrete slab. Two ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Fiber optic sensor applications for structural health monitoring
(Zbornik radova / Treći srpski kongres o putevima, 2018)
The monitoring of civil and geotechnical structures requires a variety of different measurement tasks that require different types of sensing systems. Fiber optic sensors can be used in a variety of applications and many ...
Image Processing for Hydraulic Jump Free-Surface Detection
(IAHR, 2019)
Hydraulic jumps exhibit a high degree of free-surface oscillations, triggered by intense turbulence and aeration.
These processes are difficult to model numerically and are frequently investigated on a scale model. ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...