Претраживање
Приказ резултата 141-150 од 174
Experimental investigation of interference effect of high-rise buildings for wind energy extraction
(Workshop: Tends and Challenges for Wind Energy Harvesting, 2015)
In order to increase wind energy harvesting from urban environment, the wind be- havior and the effect of the surrounding buildings needs to be fully understood. In this paper, wind tunnel experiments of the flow around a ...
Resistance of Composite Column to Compression and Bending
(Proceedings of the 14th International Symposium of MASE, Struga, Makedonija, 28. septembar 2018, 2011)
Design of the composite steel-concrete columns subjected to compression and bending, according to Eurocode
4, is shown in the paper. The effects of imperfections in the axial compression are taken into account
indirectly ...
Concave Pyramids of Second Sort -The Occurrence, Types, Variations
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
Correspondingly to the method of generating the Concave Cupolae of second sort, the Concave Pyramids of second sort have the similar logic of origination, and their counterpart in regular faced convex pyramids (tetrahedron, ...
Assessment of trafic-induced vibrations on humans and buildings according to BS and DIN standard
(IV internacionalni naučno strucni skup Građevinarstvo - nauka i praksa GNP 2012, 2012)
Traffic-induced vibrations has become great problem in the big cities. Although they can not cause damages of buildings they could have annoying effects on the citizens. In the goal of sustainable development of the cities, ...
Application of green roof for increasing the energy efficiency of the existing building in Belgrade
(Serbian Union of Mechanical and Electrical Engineering (SMEITS), 2019)
This paper presents the analysis of the potential use of green roofs to enhance the energy efficiency of the residential buildings. Namely, in urban areas, there is a lot of potential for reducing the energy needed for ...
Geometrical Characteristics and Solid Modeling of the Grasshopper Escapement Mechanism
(Faculty of Civil Engineering and Architecture ; Serbian Society for Geometry and Graphics SUGIG, Niš ; Beograd, 2014)
This paper presents the geometrical properties of one special type of escapement mechanism – the grasshopper escapement, by which the first marine chronometers were equipped. The most important and distinguish mechanical ...
Enhancing energy efficiency by application of green roof in residential building
(Faculty Of Civil Engineering Subotica, 2019)
Improving the energy efficiency in buildings in the Republic of Serbia has been recognized as an area with the greatest potential for reducing overall energy consumption. It also has an indirect impact on improving the ...
Parametric Study of Circular CFT Column Capacity According to Eurocode 4 / Parametarska analiza nosivosti kružnih CFT stubova prema Evrokodu 4
(Građevinski fakultet, Subotica, 2014)
In the paper, a simplified method for design of circular composite CFT columns according to the European standard for deisgn of composite steel and concrete structures – Eurocode 4 is presented. Veri¬fication of the column ...
The Complement of the Hugelschaffer’s Construction of the Egg Curve
(Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG), 2010)
Hügelschäffer’s construction, based on the distortion of the
ellipse construction, provides an egg-shaped curve. This curve is a
mixed cubic curve, the cubic hyperbolic parabola of type A. Curve is a
three-branched and ...
Experimental and Numerical investigations of Reinforced Concrete Frames with Masonry infills under combined in- and out-of-plane seismic loading
(16th European Conference on Earthquake Engineering, 2018)
It is well known that seismically loaded reinforced concrete frames with masonry infills exhibit an unfavourable behaviour which can lead to serious damages of the masonry infill panels and the surrounding reinforced ...