Претраживање
Приказ резултата 1-10 од 27
Furthering knowledge on the flow pattern around high-rise buildings: LES investigation of the wind energy potential
(Elsevier, 2022)
To understand the favourable locations for maximum yield of urban wind energy, understanding the flow pattern on the roof region of high-rise buildings is crucial. However, very few studies in the literature report on the ...
Numerical analysis of reinforced concrete frame buildings with decoupled infill walls
(Building materials and structures, 2020)
Reinforced concrete (RC) buildings with masonry infill walls are widely used in many countries all over the world. Although infills are considered as non-structural elements, they significantly change dynamic characte-ristics ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading
(Construction and Building Materials, 2022)
Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries ...
Performance of RC cast-in-place buildings during the November 26, 2019 Albania earthquake
(Bulletin of Earthquake Engineering, 2022)
This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected ...
Progressive failure analysis of open-hole composite laminates using FLWT-SCB prediction model
(Elsevier, 2022)
This paper presents the original incorporation of the smeared crack band (SCB) damage model within the full layerwise theory (FLWT) framework, to contribute to the increase of the computational efficiency of the progressive ...
Structural Behaviour of Axially Loaded Concrete-Filled Steel Tube Columns during the Top-Down Construction Method
(Applied Sciences, 2022)
The paper discusses the structural behaviour of concrete-filled steel tube columns (CFT)
when applied to the top-down construction method as temporary internal supports for ceilings. Their
ultimate capacity to take into ...
Flat slab response for seismic and cyclic actions prediction with numerical models
(Engineering Structures, 2023)
As an outcome of a recent European research project, the modelling of the response of flat slab structures for seismic and cyclic loading was the object of a blind competition. No other blind tests are available in the ...