Претраживање
Приказ резултата 21-27 од 27
Earthquake-proof system for masonry infills in RC frame structures
(International Journal of Masonry Research and Innovation, 2020)
The use of masonry infill walls in RC frame structures is common in many countries, even in seismically active areas, where the observations made after strong earthquakes have shown that masonry infills significantly modify ...
Influence of patch load length on strengthening effect in steel plate girders
(Journal of Constructional Steel Research, 2022)
The present paper aims to numerically investigate the influence of patch load length related to various geometric parameters on the patch loading resistance of steel plate girders. Geometric parameters such as the web ...
Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls
(Engineering Structures, 2023)
Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural ...
Seismic performance of an industrial multi-storey frame structure with process equipment subjected to shake table testing
(Engineering Structures, 2021)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of process equipment and multiple and simultaneous release of hazardous ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
Design approach for cost-effective hybrid CLT floors
(Croatian Association of Civil Engineers, 2022)
There is a growing research and production interest for the application of lower-cost
hybrid cross-laminated timber (CLT) panels composed of timber layers of dissimilar quality.
Therefore, an approach for the design of ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...